OEM Service Parts for MerCruiser 4.3L V6
✅ Verified Fit for Your Engine
Year Range: 1996-2000
Model: MerCruiser 4.3L GEN+ EFI / TBI V6
Serial Range: 0F803800 thru 0M322780
Oil Capacity: 4.5 US qt (4.3 L)
Shop OEM Service Parts & Kits
Oil Filter 35‑866340Q03
Fluid / Filter
Fitment: MerCruiser 4.3L V6 without remote oil filter. Smaller diameter oil filter for block mount application.
What’s included: (1) gallon of Quicksilver marine 25W-40 engine oil, (1) quart of Quicksilver marine 25W-40 engine oil, (1) Quicksilver 35-883702Q oil filter.
Quicksilver marine 25W-40 FC-W Synthetic Blend engine oil:
Specialized additive package outperforms automotive oils in marine environments, delivering the best wear and corrosion protection even under extreme RPM, high temperatures, and heavy loads.
Recommended by Mercury Marine and exceeds all marine engine oil requirements. Continued use helps eliminate thermal breakdown and ensures long-term protection during high-output operation.
This FC‑W Catalyst Compatible formula maintains peak engine performance and reliability without damaging emissions systems — safe for engines with or without catalytic converters.
Quicksilver 35‑866340Q03 oil filter:
Meets all Mercury Marine OEM specifications and is recommended for use with Quicksilver oils and lubes.
Engineered for high‑performance marine use, this filter features M‑Pleated cleansing media to trap harmful contaminants and protect engine internals. The anti‑drain back valve ensures startup lubrication and eliminates dry starts.
Its metal shell is over 50% thicker than conventional filters, with a durable paint finish that resists corrosion—even in saltwater environments.
Change your oil filter every 100 hours or once per season for best protection.
OEM Mercury / MerCruiser Fuel Water Separating Filter 35-802893Q01
Replacement water separating fuel filter for all MerCruiser sterndrive and inboard engines except 3.0L and 1992 4.3L engines equipped with an inline fuel filter.
Don’t let water moisture or other fuel contaminants rob horsepower from your engine. Filter those particles before they can get to your engine. Includes replacement filter and rubber gaskets for installation.
25 micron filtering elements remove damaging or performance-robbing fuel-borne contaminants
Polyester/cellulose/glass fiber with phenolic binder coated with silicon
Produced to meet Mercury Marine original equipment manufacturer specifications to best protect your engine
Quicksilver Power Trim & Steering Fluid 92-858075Q01 is formulated for use in marine power‑trim and hydraulic steering systems that specify ATF‑type fluid. Its unique blend helps protect internal components by resisting corrosion, oxidation, and wear, even in high‑temperature operating conditions. This fluid delivers smooth, reliable trim and steering performance and is recommended by Mercury Marine for compatible systems. **Not for use in applications requiring SAE 0W‑30 oil.
Size: (1) Quart, 32 oz
For use in power trim and steering systems where ATF is recommended.
Unique formula helps prevent corrosion, oxidation and wear.
Compatible with all hydraulic fluids.
Prevents foaming.
Suitable for high-temperature applications.
Recommended by Mercury Marine.
What’s included: (1) gallon of Quicksilver marine 25W-40 engine oil, (1) quart of Quicksilver marine 25W-40 engine oil, (1) Quicksilver 35‑866340Q03 oil filter.
Quicksilver marine 25W-40 FC-W Synthetic Blend engine oil:
Specialized additive package outperforms automotive oils in marine environments, delivering the best wear and corrosion protection even under extreme RPM, high temperatures, and heavy loads.
Recommended by Mercury Marine and exceeds all marine engine oil requirements. Continued use helps eliminate thermal breakdown and ensures long-term protection during high-output operation.
This FC‑W Catalyst Compatible formula maintains peak engine performance and reliability without damaging emissions systems — safe for engines with or without catalytic converters.
Quicksilver 35‑866340Q03 oil filter:
Meets all Mercury Marine OEM specifications and is recommended for use with Quicksilver oils and lubes.
Engineered for high‑performance marine use, this filter features M‑Pleated cleansing media to trap harmful contaminants and protect engine internals. The anti‑drain back valve ensures startup lubrication and eliminates dry starts.
Its metal shell is over 50% thicker than conventional filters, with a durable paint finish that resists corrosion—even in saltwater environments.
Change your oil filter every 100 hours or once per season for best protection.
OEM MerCruiser 4-Stroke FC-W Synthetic Blend 25W-40 (1 quart) marine engine oil engineered for Mercury and MerCruiser 4‑stroke engines. Quicksilver 8M0078622 marine 25W-40 engine oil specialized additive package outperforms automotive oils in marine environments, delivering the best wear and corrosion protection even under extreme RPM, high temperatures, and heavy loads.
Recommended by Mercury Marine and exceeds all marine engine oil requirements. Continued use helps eliminate thermal breakdown and ensures long-term protection during high-output operation.
This FC‑W Catalyst Compatible formula maintains peak engine performance and reliability without damaging emissions systems — safe for engines with or without catalytic converters.
For optimal results, pair with Quicksilver oil filters to match flow rate and filtration performance.
Ideal for routine oil changes, seasonal prep, and protecting your investment in harsh marine conditions.
OEM MerCruiser 4-Stroke FC-W Synthetic Blend 25W-40 (1 gallon) marine engine oil engineered for Mercury and MerCruiser 4‑stroke engines. Quicksilver 8M0078623 25W40 marine engine oil specialized additive package outperforms automotive oils in marine environments, delivering the best wear and corrosion protection even under extreme RPM, high temperatures, and heavy loads.
Recommended by Mercury Marine and exceeds all marine engine oil requirements. Continued use helps eliminate thermal breakdown and ensures long-term protection during high-output operation.
This FC‑W Catalyst Compatible formula maintains peak engine performance and reliability without damaging emissions systems — safe for engines with or without catalytic converters.
For optimal results, pair with Quicksilver oil filters to match flow rate and filtration performance.
Ideal for routine oil changes, seasonal prep, and protecting your investment in harsh marine conditions.
OEM MerCruiser 35-883702Q oil filter for MerCruiser 4.3L V6 block-mounted oil filter only. Use without a remote filter system.
Meets all Mercury Marine OEM specifications and is recommended for use with Quicksilver oils and lubes.
Engineered for high‑performance marine use, this filter features M‑Pleated cleansing media to trap harmful contaminants and protect engine internals. The anti‑drain back valve ensures startup lubrication and eliminates dry starts.
Its metal shell is over 50% thicker than conventional filters, with a durable paint finish that resists corrosion—even in saltwater environments.
Change your oil filter every 100 hours or once per season for best protection.
OEM MerCruiser 35‑866340Q03 oil filter for MerCruiser sterndrive and inboard engines, including GM‑based 4‑cylinder and V6/V‑8 models, plus Mercury 4.5L and 6.2L. (Excludes V‑6 engines with block‑mounted filters)
Meets all Mercury Marine OEM specifications and is recommended for use with Quicksilver oils and lubes.
Engineered for high‑performance marine use, this filter features M‑Pleated cleansing media to trap harmful contaminants and protect engine internals. The anti‑drain back valve ensures startup lubrication and eliminates dry starts.
Its metal shell is over 50% thicker than conventional filters, with a durable paint finish that resists corrosion—even in saltwater environments.
Change your oil filter every 100 hours or once per season for best protection.
Part Fitment Verification
⚠️
⚠️
| Oil Filter Location | Oil Change Kit | Oil Filter |
|---|---|---|
| Block | 030-80008 | 35-883702Q |
| Remote | 030-80005 | 35‑866340Q03 |
Ignition
OEM MerCruiser distributor cap and rotor kit 850484T3
This kit includes the distributor cap and rotor. It fits 4.3L V6 MerCruiser engines made by General Motors with Delco HEI ignition systems. See your owner’s manual for replacement information and directions.
Cap is made from a blend of PBT and PET plastics for increased strength, stiffness and resistance to warpage
Solid brass inserts resist corrosion and electrical pitting for long service life
Designed to resist RFI interference with onboard electronics
High strength-to-weight ratio rotor is designed for durability and resistance to thermal cracking
OEM MerCruiser distributor cap and rotor kit 815407Q5 for MerCruiser V6 engines.
Fits 4.3L V6 engines with Thunderbolt IV and V HEI systems. See your owner’s manual for replacement information and direction.
Cap is made from a blend of PBT and PET plastics for increased strength, stiffness and resistance to warpage
Solid brass inserts resist corrosion and electrical pitting for long service life
Designed to resist RFI interference with onboard electronics
High strength-to-weight ratio rotor is designed for durability and resistance to thermal cracking
OEM Quicksilver/Mercury Engine Starter 863007A1 (Replaces 50-806964A3 & 50-806964A4)
Starter motor assembly 863007A1 can be used on V6 and V8 MerCruiser engines made by General Motors (1983-2016). It will also fit MerCruiser 3.0L sterndrive engines (1999-2015). See your owner's manual or service manual for specific applications and replacement instructions.
This starter motor assembly features an 11-tooth pinion; it is for bottom mount installations with offset bolt pattern
Same starter assembly as originally installed on your engine
Designed and built for marine engine applications
Produced to meet Mercury Marine original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser sterndrive
AC Delco MR43LTS marine spark plug. Sold individually (price is per plug).
OEM part number: 33-862029
Made by AC Delco with nickel alloy tip, copper core and ribbed suppressor seal for durability and performance
OEM MerCruiser ignition coil 8M0079202
Ignition coil 8M0079202 is for V6 and V8 MerCruiser sterndrive and inboard engines made by General Motors with the Thunderbolt IV and V ignition system. See your service or parts manual for specific applications.
Ignition coil for select MerCruiser sterndrive and inboard engines
Produced to meet Mercury Marine original equipment manufacturer specifications to maximize the performance of your MerCruiser sterndrive
OEM MerCruiser ignition coil 898253T27 for 1990+ 3.0L and select V6 & V8 MerCruiser engines
Ignition coil 898253T27 is for MerCruiser engines made by General Motors with the Delco ignition system. See your service or parts manual for specific applications.
Ignition coil for select MerCruiser sterndrive and inboard engines
Produced to meet Mercury Marine original equipment manufacturer specifications to maximize the performance of your MerCruiser sterndrive
OEM MerCruiser spark plug ignition wire set 84-816608Q82 is for use on 4.3L V-6 MerCruiser engines (262 CID) with Delco HEI ignition systems (1996 through 2001).
Complete set of spark plug wires with boots at spark plug end
Tailored wire lengths for proper plug reach and coil connection
High-grade insulation resists moisture, heat, and abrasion
Corrosion-resistant terminals for long service life
Positive-click boots confirm secure spark plug connection
Designed for efficiency, endurance, and marine-grade durability
OEM MerCruiser spark plug: NGK 3623 BPR6EFS (Mercury sourced part numbers: 816336Q)
Genuine NGK spark plug
NGK spark plugs are designed for a long service life and maximum performance.
They are resistant to carbon buildup and pre-ignition
Longer insulator nose prevents fouling and misfiring
Solid copper core aids in heat removal
Alumina ceramics for better heat transfer
Triple seals prevent leakage
Corrugated ribs prevent flashover
Sold individually (price is per plug)
Model: 3623
*Alternative spark plug to AC Delco MR43LTS
Part Fitment Verification
⚠️
⚠️
| Serial Number | Distributor Cap & Rotor Kit | Ignition Coil |
|---|---|---|
| 0L012009 thru 0L359999 | 850484T3 | 898253T27 |
| 0L360000 + | 815407Q5 | 8M0079202 |
Cooling System
OEM MerCruiser thermostat kit 807252Q5 includes 160°F thermostat and necessary gaskets / seals for replacement.
Fitment: V6 and V8 MerCruiser engines made by GM (model year 1987-2016) with standard cooling. 4 cylinder 3.0L / TKS / MPI 1998+ with standard cooling
Proper engine cooling temperature ensures peak performance and highest efficiency
Use only the temperature thermostat listed in your owner's manual or service manual
Easy to replace with common shop tools
See your owner's manual for removal of non-functioning thermostat and replacement of new thermostat
Produced to meet Mercury Marine original equipment manufacturer specifications
OEM MerCruiser thermostat kit 991551T1 includes 160°F thermostat and necessary gaskets / seals for replacement.
Thermostat kit 991551T1 is for 1998 and newer MerCruiser marinized V-6 and V-8 engines made by General Motors using closed cooling systems and requiring the use of the 160 F degree thermostat. The kit includes the thermostat and seal.
OEM MerCruiser thermostat housing sleeve 23-8M0214947
Fits most MerCruiser 3.0L, 5.0L, 5.7L, 6.2L, 7.4L and 8.2L stern drive and inboard engines made by General Motors having standard cooling systems. The sleeve supports the thermostat in the thermostat housing. The sleeve is made with polybutylene terephthalate (PBT), a thermoplastic polymer, to withstand the temperatures in the engine and deliver long service life.
Part Fitment Verification
⚠️
⚠️
| Cooling Type | Thermostat Kit | Sleeve |
|---|---|---|
| Standard (Raw) | 807252Q5 | 23-8M0124947 |
| Closed | 040-80004 | N/A |
Recommended Service Guide
Thermostat:
Freshwater use: Every 3–5 years
Saltwater use: Every 1–2 years
Gaskets:
Replace gaskets if rust streaks or staining is present at joints
Cooling System Replacement Interval
Oil + Filter:
Annually or 100 hours
Fuel Filter:
Annually or 100 hours
Power Steering Fluid:
Inspect and top off annually(if equipped) Replace fluid if discolored, burnt, or contaminated
Fluid / Filter Replacement Interval
Spark Plugs:
Every 1-2 years or 300 hours
Distributor Cap/Rotor:
Inspect annually, Replace every 2-3 years or if contacts are corroded
Spark Plug Wires:
Inspect annually, Replace every 3-5+ years or if cracked, corroded, or misfiring.
Ignition Replacement Interval
Belts:
Inspect annually. Replace every 3-5+ years or if worn, cracked, or frayed.
Belt Replacement Interval
Disclaimer: This is not a full service list, only suggested intervals for common components. Always follow official MerCruiser manuals for complete maintenance